Instruction Manual

5–84 Programming Parameters
Publication 1397-5.0 — June, 2001
Process Display
[Process 1 Text 7] — P.255
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 32
Maximum Value: 127
[Process 1 Text 8] — P.256
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 32
Maximum Value: 127
[Process 2 Par] — P.257
This parameter should be set to the number
of the parameter whose scaled value will be
displayed on Line 2 of the HIM Display Panel.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 0
Factory Default: 6
Maximum Value: 308
[Process 2 Scale] — P.258
This value sets the scaling multiplier for
[Process 2 Par].
Display/Drive Units: Numeric/Text
Parameter Range: –3127.69 – +327.68
Parameter Type: Read & Write
Group: Process Display
Minimum Value: –32768
Factory Default: 100
Maximum Value 32767