Instruction Manual

5–73Programming Parameters
Publication 1397-5.0 — June, 2001
MASKS
[Reference Mask] — P.204
This parameter controls which adapters can
select an alternate reference.
Display/Drive Units: Numeric/Text
Parameter Range: Bit # Enum Text
0 = Terminal Block
1 = Adapter 1
2 = Adapter 2
3 = Adapter 3
4 = Adapter 4
5 = Adapter 5
6 = Adapter 6
Parameter Type: Read & Write
Group: Masks
Minimum Value: 0000000000000000
Factory Default: 0000000001111111
Maximum Value: 0000000001111111
[Fault Reset Mask] — P.205
This parameter controls which adapters can
reset a fault condition.
Display/Drive Units:
Parameter Type: Read & Write
Group: Masks
Minimum Value: 000000000000000
Factory Default: 0000000001111111
Maximum Value: 0000000001111111
[MOP Mask] — P.206
This parameter controls which adapters can
issue MOP commands to the drive
Display/Drive Units: Numeric/Text
Parameter Range: Bit #
Enum Text
0 = Terminal Block
1 = Adapter 1
2 = Adapter 2
3 = Adapter 3
4 = Adapter 4
5 = Adapter 5
6 = Adapter 6
Group: Masks
Minimum Value: 0000000000000000
Factory Default: 0000000001111111
Maximum Value: 0000000001111111