Instruction Manual

5–53Programming Parameters
Publication 1397-5.0 — June, 2001
OUTPUT CONFIG
[Anlg Out 1 Zero] — P.146
Removes any hardware-introduced offset
from the Analog 1 output signal at the
regulator board terminal strip.
Display/Drive Units: Numeric
Parameter Type: Tunable
Group: Output Config
Factory Default: 0
Minimum Value: –200
Maximum Value: 200
[Anlg Out 2 Gain] — P.147
Scales the Analog 2 Output Signal at the
regulator board terminal strip.
Display/Drive Units: Numeric
Parameter Type: Tunable
Group: Output Config
Factory Default: 1.000
Minimum Value: 0.100
Maximum Value: 1.900