Instruction Manual

5–20 Programming Parameters
Publication 1397-5.0 — June, 2001
METERING
[Spd Loop Ref] — P.025
An output that represents the reference value
to be used by the speed loop regulator in the
drive.
Display/Drive Units: RPM
Group: Metering
Type:
Factory Default: 0
Minimum Value: –5000.0
Maximum Value: 5000.0
[Spd Src Output] — P.026
The user selected speed reference source
value. It is an input to the speed reference
ramp section.
Display/Drive Units: RPM
Group: Metering
Type:
Factory Default: 0
Minimum Value: –5000.0
Maximum Value: 5000.0
[Spd Ramp In TP] — P.027
An output that represents the test point value
immediately before the speed loop ramp
function.
Display/Drive Units: RPM
Group: Metering
Type:
Factory Default: 0
Minimum Value: –5000.0
Maximum Value: 5000.0
[Spd Ramp Output] — P.028
An output that represents the test point value
immediately after the speed loop ramp
function.
Display/Drive Units: RPM
Group: Metering
Type:
Factory Default: 0
Minimum Value: –5000.0
Maximum Value: 5000.0