Hardware/Software

Chapter 8
Reference
8–20
Parameter 574 – [A>ChB DIP Switch]
Parameter 524 – [B>ChB DIP Switch]
Use: Indicates DIP switch settings (U14 & U15) for channel B.
Parameter Type: Configuration
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value:
Description: Indicates the hardware DIP switch settings used to define
adapter channel A. These settings are read by the Adapter at power-up
and any time a System Reset message is received by the Drive.
Parameter 599 – [A>Cx: Version ] where “x” is as follows:
Parameter 549 – [B>Cx: Version ] where “x” is as follows:
X
CHA CHB
CA None None
CB RIO DH+
CC DH+ RIO
CD DH+ DH+
CE RIO RIO> Not Redundant
CF RIO RIO> Redundant
CG RIO None
CH None RIO
CI DH+ None
CJ None DH+
Use: Indicates the MCA board firmware version.
Parameter Type: Configuration
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: 1.02
Description: Indicates the firmware version of the MCA board.