Owner manual

Chapter 4
Installation
4-3
Figure 4.1
Discrete
Adapter Board Location
AB0727A
Discrete
Adapter Board
Discrete
Adapter Board
130 HP, 230VAC
260 HP, 460VAC
40100 HP, 230VAC
75200 HP, 460VAC
125300 HP, 230VAC
250600 HP, 460VAC
Connections to Drive The Discrete Adapter Board can be connected to either Microbus Port A or
B on the Drive through a ribbon cable connector J1 located at the top of the
board. Connection to TB3 is made through two connectors, J3 and J4.
Looking into the Drive, Port A is located on the left side, and Port B is
located on the right as seen in Figure 4.2. The parameters used to configure
the Drive depend upon which port is utilized.