Reference Adapter for RTP Applications User Manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- Who Should Use This Manual
- Purpose of This Manual
- Safety Precautions
- Contents of This Manual
- Related Documentation
- Information on the Intelligent Terminal System (ITS)
- Bulletin 1300 Intelligent Terminal System Documentation Set
- Allen-Bradley offers support services worldwide, with Sales/Support Offices, authorized distribut...
- Contact your local Allen-Bradley representative for:
- If you need to contact Allen-Bradley for technical assistance, please review the product and trou...
- Chapter 1
- Chapter 2
- Chapter 3
- Chapter 4
- Chapter 5
- Chapter Content
- 1. These steps should already have been performed on a custom Drive manufactured and shipped as a...
- 2. If a Drive that has already been installed is receiving a Digital Reference Adapter Board as a...
- 3. If for any reason a given Drive loses the EE memory information, it will also be necessary to ...
- 4. Should there be a need to check or download parameters to the Drive, use of the ITS device wil...
- 1. Establish Configuration Links between Drive and the Digital Reference Adapter Board.
- 2. Program Digital Reference Adapter Set-Up Parameters.
- Terminology
- Parameter Set-Up Description
- Example Start-Up Configuration (Linking)
- Digital Input/Output Set-up
- Analog Input/Output Set-up
- Configuration Links Set-up
- Chapter Content
- Chapter 6
- Introduction
- 1. Hard Faults Hard Faults are nonrecoverable. That is, the 1395 Drive must either be RESET or PO...
- 2. Soft Faults Soft Faults occur when an Adapter Board detects a condition which may result in un...
- 3. Warning Faults Conditions detected within the system that may produce Soft Faults if the condi...
- Digital Reference Fault Messages
- Adapter Troubleshooting
- Introduction
- Chapter 7
- Chapter 8
- Index
- Back Cover
Publication 1395-RTP-5.2 - September 1997
Preface P-3
Contents of This Manual
Related Documentation
The following documents contain additional information concerning
related Allen-Bradley products and related standards. To obtain a
copy of Allen-Bradley publications, contact your local Allen-Bradley
office or distributor.
Chapter Title Contents
Preface Purpose, background, and scope of this manual
1 Introduction Description of equipment and specifications
2 Hardware Description Board functionality and descriptions of I/O
3 Control Description State diagrams, drive logic states, and drive reference control states
4 Installation Receiving, unpacking, inspection, storage, and connections to the drive
5 Start-Up Instructions Terminology, parameter set-up and configurations
6 Troubleshooting Digital reference adapter fault messages
7 Periodic Maintenance Preventive maintenance, test, and records
8 Parameter Table Parameter table and descriptions
For Read This Document Document Number
Detailed description of the enhanced programming
terminal
Enhanced Programming Terminal Manual 1300-5.4
Detailed description of the programming terminal Programming Terminal Manual 1300-5.5
Information on the 1395 digital DC Drive 1395 User Manual 1395-5.40
Information on troubleshooting the 1395 digital DC
Drive
1395 Troubleshooting Manual 1395-5.45
Information on the RTP adapter Reel Tension Paster User Manual 1395-RTP-5.1
An article on wire sizes and types for grounding
electrical equipment
National Electrical Code ANSI / NFPA 70
Published by the National Fire
Protection Association of
Boston, MA
Information on the Intelligent Terminal System
(ITS)
Bulletin 1300 Intelligent Terminal System
Documentation Set
D1300-L00
An article on safety procedures Standard for Electrical Safety Requirements
for Employee Workplaces
ANSI / NFPA 70E
A complete listing of current Allen-Bradley
documentation, including ordering instructions. Also
indicates whether the documents are available on
CD-ROM or in multi-languages
Allen-Bradley Publication Index SD499
A glossary of industrial automation terms and
abbreviations
Allen-Bradley Industrial Automation
Glossary
AG-7.1