Reference Adapter for RTP Applications User Manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- Who Should Use This Manual
- Purpose of This Manual
- Safety Precautions
- Contents of This Manual
- Related Documentation
- Information on the Intelligent Terminal System (ITS)
- Bulletin 1300 Intelligent Terminal System Documentation Set
- Allen-Bradley offers support services worldwide, with Sales/Support Offices, authorized distribut...
- Contact your local Allen-Bradley representative for:
- If you need to contact Allen-Bradley for technical assistance, please review the product and trou...
- Chapter 1
- Chapter 2
- Chapter 3
- Chapter 4
- Chapter 5
- Chapter Content
- 1. These steps should already have been performed on a custom Drive manufactured and shipped as a...
- 2. If a Drive that has already been installed is receiving a Digital Reference Adapter Board as a...
- 3. If for any reason a given Drive loses the EE memory information, it will also be necessary to ...
- 4. Should there be a need to check or download parameters to the Drive, use of the ITS device wil...
- 1. Establish Configuration Links between Drive and the Digital Reference Adapter Board.
- 2. Program Digital Reference Adapter Set-Up Parameters.
- Terminology
- Parameter Set-Up Description
- Example Start-Up Configuration (Linking)
- Digital Input/Output Set-up
- Analog Input/Output Set-up
- Configuration Links Set-up
- Chapter Content
- Chapter 6
- Introduction
- 1. Hard Faults Hard Faults are nonrecoverable. That is, the 1395 Drive must either be RESET or PO...
- 2. Soft Faults Soft Faults occur when an Adapter Board detects a condition which may result in un...
- 3. Warning Faults Conditions detected within the system that may produce Soft Faults if the condi...
- Digital Reference Fault Messages
- Adapter Troubleshooting
- Introduction
- Chapter 7
- Chapter 8
- Index
- Back Cover
Table of Contents
Publication 1395-RTP-5.2 - September 1997
Chapter 4 Installation
ChapterContent ................................. 4-1
Receiving ...................................... 4-1
ESDPrecautions ................................ 4-2
Unpacking&Inspection ........................... 4-2
Storage........................................ 4-2
Mounting....................................... 4-2
ConnectionstoDrive ............................. 4-3
Chapter 5 Start-Up Instructions
ChapterContent ................................. 5-1
Terminology .................................... 5-1
ParameterSet-UpDescription ...................... 5-2
ExampleStart-UpConfiguration(Linking) ............. 5-2
DigitalInput/OutputSet-Up......................... 5-4
Analog Input/Output Set-Up . . . . . . . . . . . . . . . . . . . . . . . . 5-4
ConfigurationLinksSet-Up ........................ 5-4
Chapter 6 Troubleshooting
Introduction..................................... 6-1
DigitalReferenceFaultMessages ................... 6-1
AdapterTroubleshooting........................... 6-3
Chapter 7 Periodic Maintenance
PreventativeMaintenance.......................... 7-1
Test&Records.................................. 7-2
Chapter 8 Parameter Table
Introduction..................................... 8-1
Terminology .................................... 8-1
ParameterTable................................. 8-2
ParameterDescriptions ........................... 8-5
ConfigurationParameters ......................... 8-6
Set-UpParameters............................... 8-10
Index