Owner manual

Index
I-15
Velocity Desired Bandwidth, 700, 7-57
Velocity Error, 124, 7-24
Velocity Feed Forward, 108, 7-21
Velocity Feedback Control, 5-26
Block Diagram, 5-34
Velocity Feedback Filter Select, 631, 7-41
Velocity Feedback Select, Definition, 5-4
Velocity Feedback, 106, 7-20
Velocity Indirect 1, 163, 7-31
Velocity Indirect 2, 164, 7-31
Velocity Indirect 3, 165, 7-31
Velocity Indirect 4, 166, 7-32
Velocity Loop Motor Test, 5-14
Velocity Loop System Test, 5-14
Velocity Loop Tune, 5-14
Definition, 5-16
Velocity Loop Motor Test, 5-17
Velocity Loop System Test, 5-17
Velocity Loop Tune, 5-17
Velocity Maximum Bandwidth, 701, 7-57
Velocity Parameter 1 Select, 600, 7-32
Velocity Parameter 2 Select, 601, 7-32
Velocity Parameter 3 Select, 602, 7-32
Velocity Parameter 4 Select, 603, 7-32
Velocity PI Control, 5-27
Block Diagram, 5-35
Velocity PI Output, 123, 7-24
Velocity Reference Control, 5-25
Block Diagram, 5-32
Velocity Reference Fraction, 153, 7-29
Velocity Reference Whole, 154, 7-29
Voltage Measurement, 8-5
1–30 HP and 2–60 HP, 8-6
115VAC, 8-5
125–300 HP and 250–600 HP, 8-7
24VDC, 8-6
40–100 HP and 75–200 HP, 8-7
Field AC, 8-5
Voltage Transient Protection, 1–30 HP/2–60 HP Drives,
2-4, 2-5
W
Warning Select, 632, 7-41
Wire Size and Type, 6-6
Wiring
Clearance, 6-5
Power, 6-13
Procedure, 6-14
Wn Filter, 693, 7-56
Z
Zero Potential Bus (TE), 6-8, 6-10
Zero Speed Tolerance, 710, 7-60