Owner manual

Chapter 9
Reference Materials
9-13
Parameter Reference Listing (Alphabetical)
PARAMETER NAME PARAMETER NO. PAGE REFERENCE
System Inertia 703 7-58
System Reset Select 620 7-36
Strt Taper Speed 665 7-48
Tach Loss CEMF 731 7-65
Tach Loss Vel 732 7-65
Tach Switch Ki 689 7-55
Tach Switch Kp 690 7-55
Tach Switch Select 691 7-56
Tach Switch Tol 688 7-55
Tach Velocity 156 7-30
Torque Command 110 7-21
Torque Mode 625 7-38
Torque Reference 157 7-30
Torque Reference 2 167 7-32
Trend 1 Contig Trigger Swtch 915 7-76
Trend Constant Signed Value 900 – 903 7-72
Trend Constant Logic Value 904 – 907 7-73
Trend Constant Unsigned Value 908 – 909 7-74
Trend 1 Enable Trend 916 7-77
Trend 1 Operand Parameter X 910 7-75
Trend 1 Operand Parameter Y 911 7-75
Trend 1 Operator 912 7-75
Trend 1 Output Transmit Rate 917 7-77
Trend 1 Sampling Rate 913 7-76
Trend 1 Samples After Trigger 914 7-76
Up to Speed Tol 709 7-60
Vel Desired BW 700 7-57
Vel Damp Factor 702 7-58
Velocity Error 124 7-24
Velocity Feedback 106 7-20
Velocity Feed Forward 108 7-21
Velocity Filter Sel 631 7-41
Velocity Indirect 1 163 – 166 7-31 – 7-32
Velocity Max BW 701 7-57
Velocity PI Output 123 7-24
Velocity Ref Fraction 153 7-29
Velocity Ref Whole 154 7-29
Warning Select 632 7-41
Zero Speed Tol 710 7-60