Owner manual

Chapter 1
Introduction, Inspection & Storage, and
Publication References
1-7
Rev Requirement – Requires Main Control Board Revision
8.10 or greater.
ControlNet Adapter
Board;
Communication
Channel –
One ControlNet channel with a redundant
connector to allow for backup connection
in case one fiber optic cable fails.
One Network Access PortPort –
Catalog Number Explanation
First Position
Bulletin No.
A611395
Second Position
Horsepower
1395
230 Volt AC Input (1–100HP)
A61 – 1HP
A62 – 1.5 HP
A63 – 2HP
A64 – 3HP
A65 – 5HP
A66 – 7.5HP
A67 – 10HP
A68 – 15HP
A69 – 20HP
A70 – 25HP
A71 – 30HP
A72 – 40HP
A73 – 50HP
A74 – 60HP
A75 – 75HP
A76 – 100HP
Letter
C1
Third Position
Contactor Type
Standard
C1 – 1 – 15HP
C2 – 20 – 30HP
C3 – 40 – 50HP
C4 – 60 – 75HP
C5 – 100HP
Dynamic Braking
D1 – 1 – 15HP
D2 – 20 – 30HP
D3 – 40 – 50HP
D4 – 60 – 75HP
D5 – 100HP
P10 – X1
Fourth Position
Options*
P10 Discrete Adapter 115 VAC (Port A)
P11 Discrete Adapter 24VDC (Port A)
P12 Digital Reference Adapter (Port A)
P50 Node Adapter (Port B)
P51 Multi–Communication Adapter (Port B)
P54EN ControlNet Adapter Board (Port A or B)
PZ No Adapter
Other Options
X1 – Auxiliary Contact (1–N.O – 1–N.C.)
(standard on 100 HP)
* Multiple options are separated by dashes
* Limited to one adapter in port A and one adapter in Port B.
HP Letter HP Letter Description
Regenerative
Non–Regenerative
A61N – 1HP
A62N – 1.5 HP
A63N – 2HP
A64N – 3HP
A65N – 5HP
A66N – 7.5HP
A67N – 10HP
A68N – 15HP
A69N – 20HP
A70N – 25HP
A71N – 30HP