Manual

ManualsBrandsRockwell Automation ManualsEquipment1394 Shunt Modules Fuse Replacement Kit

(Catalog Numbers 1394-SR10, -SR9A, -SR9AF, -SR36A,

and -SR36AF)

This document illustrates replacing the fuse in the 1394 shunt modules

(Catalog Numbers 1394-SR10, -SR9A, -SR9AF, -SR36A, and -SR36AF).

To replace the 1394-SR10 shunt module fuse:

Remove power from your system including power to the shunt module.

Locate the fuse holder.

ATTENTION:

This system may have multiple

sources of power. More than one disconnect switch

may be required to de-energize the system. To avoid

shock hazard or personal injury, verify that all power

has been removed before proceeding.

ATTENTION:

This product contains stored energy

devices. To avoid hazard of electrical shock, verify that

all voltage on the capacitors has been discharged before

attempting to service, repair, or remove this unit. You

should only attempt the procedures in this document if

you are qualified to do so and familiar with solid-state

control equipment and the safety procedures in

publication NFPA 70E.

To COL

To DC+

Fuse Holder

Summary of content (4 pages)

PAGE 1
Installation Instructions 1394 Shunt Modules Fuse Replacement Kit (Catalog Numbers 1394-SR10, -SR9A, -SR9AF, -SR36A, and -SR36AF) This document illustrates replacing the fuse in the 1394 shunt modules (Catalog Numbers 1394-SR10, -SR9A, -SR9AF, -SR36A, and -SR36AF). Replacing the 1394-SR10 To replace the 1394-SR10 shunt module fuse: Fuse 1. Remove power from your system including power to the shunt module. ! ! ATTENTION: This system may have multiple sources of power.
PAGE 2
1394 Shunt Modules Fuse Replacement Kit 3. Remove the fuse from the fuse holder with the fuse puller tool. 4. Insert the new Bussmann 700V 40A fuse (FWP40A14F) or equivalent into the 1394-SR10A fuse holder. 5. Apply power to your system. Replacing the 1394-SR9A, -SR9AF, -SR36A, and SR36AF Fuse and Label To replace the 1394-SR9A, -SR9AF, -SR36A, and -SR36AF shunt module fuse and label: 1. Remove power from your system including the shunt module. ATTENTION: This system may have multiple sources of power.
PAGE 3
1394 Shunt Modules Fuse Replacement Kit If your 1394-SR9A, SR9AF, -SR36A, or SR36AF shunt module: Has the UL mark Does not have the UL mark 3 You need a: Bussmann 600V DC 50A fuse (FWP50A14F) or equivalent. Bussmann 600V DC 40A fuse (170N2013) or equivalent. 3. Locate the door panel latch(es).
PAGE 4
7. Remove the fuse from the fuse holder with the fuse puller tool. If your 1394-SR9A, - Replace the fuse with a: SR9AF, -SR36A, or SR36AF shunt module: Has the UL mark Bussmann 600V DC 50A fuse (FWP50A14F) or equivalent. Does not have the UL Bussmann 600V DC 40A fuse (170N2013) or equivalent. mark 8. Close the door panel. 9. Secure the door panel. 10. Attach the new fuse label over the existing fuse label on the front door panel of the shunt module.