Instruction Manual

7–64 Programming
The following parameter appears only in the Linear List and is not
documented elsewhere.
Linear
List
Thisgrouplistsalltheparameterscurrently installedinyourdriveinnumericalorder.Refer
to the Appendix at the back of this manual for an alpha/numeric listing of all parameters.
[Bidir In Offset]
Trims the offset of the bi-directional inputs on LA6 & LA7
optioncards.Toprovideanequalresponsetopositiveand
negativesignals,this parameter mayneed tobeadjusted
foreach board. With no voltage on input0, monitor [Anlg
In 0 Freq] and adjust [Bidir In Offset] until it is zero.
Parameter Number 329
Parameter Type Read and Write
Display Units / Drive Units None
Factory Default 270
Minimum Value 0
Maximum Value 1024