Instruction Manual

7–46 Programming
Owners
[Decel Owner]
This parameter displays which adapter has exclusive
control of selecting [Decel Time 1] or [Decel Time 2].
Parameter Number 108
Parameter Type Read Only
Units Display Drive
“0” 0 Non-Owner
“1” 1 Current Owner
[Fault Owner]
This parameter displays which adapter is presently
resetting a fault.
Parameter Number 109
Parameter Type Read Only
Units Display Drive
“0” 0 Non-Owner
“1” 1 Current Owner
[MOP Owner]
This parameter displays which adapters are currently
issuing increases or decreases in MOP Command
Frequency.
Parameter Number 110
Parameter Type Read Only
Units Display Drive
“0” 0 Non-Owner
“1” 1 Current Owner
[Traverse Owner]
Displays which SCANport adapter is presently enabling
the traverse function.
Parameter Number 306
Parameter Type Read Only
Units Display Drive
“0” 0 Non-Owner
“1” 1 Current Owner
[Sync Owner]
Displays which SCANport adapter is presently enabling
the sync function.
Parameter Number 309
Parameter Type Read Only
Units Display Drive
“0” 0 Non-Owner
“1” 1 Current Owner
[Local Owner]
This parameter displays which adapter has requested
exclusive control of all drivelogic functions. If an adapter
is in local lockout, all other functions (except stop) on all
other adapters are locked out and non-functional. Local
controlcanonlybeobtainedwhenthedriveis notrunning.
Parameter Number 179
Parameter Type Read Only
Units Display Drive
“0” 0 Non-Owner
“1” 1 Current Owner