Manual

1336 FORCE™ To PowerFlex® 700S Phase II AC Drive Conversion Guide 54
Agency Certification
— — The drive is designed to meet applicable requirements of the
following codes/standards: IEC 61800-2 Adjustable speed electrical power drive systems - General requirements IEC 61800-5-1 Adjustable speed electrical power drive systems - Safety requirements NFPA 70 – US National Electric Code NEMA 250 – Enclosures for Electrical Equipment
The drive is designed to meet applicable requirements of the following codes/standards: IEC 61800-2 Adjustable speed electrical power drive systems - General requirements IEC 61800-5-1 Adjustable speed electrical power drive systems - Safety requirements NFPA 70 - US National Electrical Code
c-UL-us
UL and cUL Listed to UL508C and CAN/CSA - 22.2 No. 14-95
UL and cUL Listed to UL508C and CAN/CSA - 22.2 No. 14-95
CE
Marked for all applicable European Directives:* Emissions
EN 55011 Class B
Immunity
EN 50082-1 EN 50082-2
IEC 801-2, 3, 4 per EN50082-1, 2 * Installation guidelines detailed in Appendix B of the 1336 FORCE User Manual, publication 1336 FORCE 5.0, must be strictly followed.
Marked for all applicable European Directives: EMC Directive (89/336/EEC) Emissions
EN 61800-3 Adjustable Speed electrical power drive systems
Part 3 Immunity
EN 61800-3 Second Environment, Restricted Distribution
Low Voltage Directive (73/23/EEC)
EN 50178 Electronic Equipment for use in Power Installations
Marked for all applicable European Directives: EMC Directive (89/336/EEC) Emissions
EN 61800-3 Adjustable Speed electrical power drive
systems Part 3 Low Voltage Directive (73/23/EEC)
EN 50178 Electronic Equipment for use in Power
Installations
C-Tick
— — — Certified to AS/NZS, 1997 Group 1, Class A.
ATEX
— — Certified to ATEX directive 94/9/EC. Group II Category (2) GD Applications with ATEX Approved Motors.
TÜV
— — TUV Rheinland (applies to frames 1 - 6, 200/400V, and frames 5
& 6, 690V only) TUV Functional Safety Report only for frames 1 - 4, 600V (no FS mark on the label)
TUV functional safety report only (no FS mark on the label)
Category
Specification
1336 FORCE Drive
PowerFlex 700S Phase II Drive Frames 1-6 (690V Drive frames 5 & 6 only) PowerFlex 700S Phase II Drive Frames 9 & up