User Manual

1336 FORCEt Language Module Replacement2
o 3. Remove the module by squeezing the
sides - in, and pulling outward. Discard
module.
L
A
N
G
U
A
G
E
M
O
D
U
L
E
A
L
L
E
N
-B
R
A
D
L
E
Y
o 4. Position the new Language Module on
the board, using the silk screen outline on
the board as a guide.
o 5. Carefully align the module connector
with the board connector. Firmly press the
module onto the board until fully seated.
The module will “snap” (lock) in place.
o 6. Replace drive cover and check for proper
operation.
Important: Each module contains English
and an alternate language. The
factory default setting for the
[Language] parameter is
“English.” To program and
operate the drive in the alternate
language, the [Language]
parameter must be programmed
to the alternate language.
L
A
N
G
U
A
G
E
M
O
D
U
L
E
A
L
L
E
N
-B
R
A
D
L
E
Y
1336 FORCE is a trademark of Allen-Bradley Company, Inc.