Owner's manual

2–13Installation/Wiring
Table 2.D
Lug Selection
AC Input R, S, T
Output U, V, W and PE
DC+
DC–
2
TE
Drive Catalog
Number
Cable (per Phase)
Qty. mm
2
(AWG)
T&B Part No.
3
Qty. Number
Cable (per Phase)
Qty. mm
2
(AWG)
T&B Part No.
3
Qty. Number
Cable (per Phase)
Qty. mm
2
(AWG)
T&B Part No.
3
Qty. Number
1336S–A040 (1) 53.5 (1/0) (8) 54153
1
(1) 13.3 (6) (2) 54135
1
(1) 13.3 (6) (1) 54135
1
1336S–A050 (1) 85.0 (3/0) (8) 54163
1
(1) 13.3 (6) (2) 54135
1
(1) 13.3 (6) (1) 54135
1
1336S–A060 (1) 107.2 (4/0) (8) 54168
1
(1) 13.3 (6) (2) 54135
1
(1) 21.2 (4) (1) 54139
1
1336S–A075 (2) 53.5 (1/0) (8) 54109T
(8) 54109B
(1) 33.6 (2) (2) 54109 (1) 21.2 (4) (1) 54139
1
1336S–A100 (2) 85.0 (3/0) (8) 54111T
(8) 54111B
(1) 42.4 (1) (2) 54148 (1) 33.6 (2) (1) 54142
1
1336S–A125 (2) 107.2 (4/0) (8) 54112T
(8) 54112B
(1) 67.4 (2/0) (2) 54110 (1) 33.6 (2) (1) 54142
1
1336S–B060 (1) 42.4 (1) (8) 54147
1
(1) 8.4 (8) (2) 54131
1
(1) 13.3 (6) (1) 54135
1
1336S–B075 (1) 53.5 (1/0) (8) 54153
1
(1) 13.3 (6) (2) 54135
1
(1) 13.3 (6) (1) 54135
1
1336S–B100 (1) 85.0 (3/0) (8) 54163
1
(1) 13.3 (6) (2) 54135
1
(1) 13.3 (6) (1) 54135
1
1336S–B125 (1) 107.2 (4/0) (8) 54168
1
(1) 26.7 (3) (2) 54147
1
(1) 21.2 (4) (1) 54139
1
1336S–BX150 (1) 107.2 (4/0) (8) 54168
1
(1) 26.7 (3) (2) 54147
1
(1) 21.2 (4) (1) 54139
1
1336S–B150 (2) 53.5 (1/0) (8) 54109T
(8) 54109B
(1) 33.6 (2) (2) 54110 (1) 21.2 (4) (1) 54139
1
1336S–B200 (2) 85.0 (3/0) (8) 54111T
(8) 54111B
(1) 42.4 (1) (2) 54148 (1) 26.7 (3) (1) 54142
1
1336S–B250 (2) 107.2 (4/0) (8) 54112T
(8) 54112B
(1) 67.4 (2/0) (2) 54110 (1) 33.6 (2) (1) 54142
1
1336S–BX250 (3) 53.5 (1/0) (24) 54109 (1) 67.4 (2/0) (2) 54110 NA NA
1336S–BP250 (3) 53.5 (1/0) (24) 54109 (1) 67.4 (2/0) (2) 54110 NA NA
1336S–B300 (3) 67.4 (2/0) (24) 54110 (1) 42.4 (1) (2) 54148 NA NA
1336S–BP300 (3) 67.4 (2/0) (24) 54110 (1) 42.4 (1) (2) 54148 NA NA
1336S–B350 (3) 85.0 (3/0) (24) 54111 (1) 42.4 (1) (2) 54148 NA NA
1336S–BP350 (3) 85.0 (3/0) (24) 54111 (1) 42.4 (1) (2) 54148 NA NA
1336S–B400 (3) 107.2 (4/0) (24) 54112 (1) 42.4 (1) (2) 54148 NA NA
1336S–BP400 (3) 107.2 (4/0) (24) 54112 (1) 42.4 (1) (2) 54148 NA NA
1336S–B450 (3) 127.0 (250 MCM) (24) 54174 (1) 42.4 (1) (2) 54148 NA NA
1336S–BP450 (3) 127.0 (250 MCM) (24) 54174 (1) 42.4 (1) (2) 54148 NA NA
1336S–B500 (3) 152.0 (300 MCM) (24) 54179 (1) 53.5 (1/0) (2) 54109 NA NA
1336S–B600 (3) 152.0 (300 MCM) (24) 54179 (1) 53.5 (1/0) (2) 54109 NA NA
1336S–C075 (1) 33.6 (2) (8) 54142
1
(1) 13.3 (6) (2) 54135
1
(1) 8.4 (8) (1) 54131
1
1336S–C100 (1) 53.5 (1/0) (8) 54153
1
(1) 13.3 (6) (2) 54135
1
(1) 13.3 (6) (1) 54135
1
1336S–C125 (1) 67.4 (2/0) (8) 54158
1
(1) 26.7 (3) (2) 54147
1
(1) 13.3 (6) (1) 54135
1
1336S–C150 (1) 107.2 (4/0) (8) 54111 (1) 42.4 (1) (2) 54148 (1) 13.3 (6) (1) 54135
1
1336S–C200 (2) 67.4 (2/0) (8) 54110T
(8) 54110B
(1) 42.4 (1) (2) 54148 (1) 26.7 (3) (1) 54142
1
1336S–C250 (2) 85.0 (3/0) (8) 54111T
(8) 54111B
(1) 67.4 (2/0) (2) 54110 (1) 26.7 (3) (1) 54142
1
1336S–CX300 (3) 85.0 (3/0) (16) 54111 NA NA
1336S–C300 (3) 85.0 (3/0) (16) 54111 NA NA
1336S–C350 (3) 53.5 (1/0) (24) 54109 NA NA
1336S–C400 (3) 67.4 (2/0) (24) 54110 Consult Factory NA NA
1336S–C450 (3) 85.0 (3/0) (24) 54111
Consult
Factory
NA NA
1336S–C500 (3) 107.2 (4/0) (24) 54112 NA NA
1336S–C600 (3) 127.0 (250 MCM) (24) 54174 NA NA
1
5/16” Stud. All other studs are 3/8”.
2
Lugs shown for DC+/– are based on dynamic brake sizing of 50% of (motor rating X 1.25). Select proper lugs based on required braking torque. Refer to 1336-5.64
or 1336-5.65 for additional information.
3
T & B COLOR-KEYED

Connectors require T & B WT117 or TBM–6 Crimper tool or equivalent. Lugs should be crimped according to manufacturer’s tool
instructions. If required, Rockwell Automation can supply lug kits for lugs shown above. Kits do not include crimping tools. Consult factory for kit information.