Owner's manual

5–42 Programming
[Jog Owner]
This parameter displays which adapters are
presently issuing a valid jog command.
Parameter Number 105
Parameter Type Read Only
Units Display Drive
“0” 0
Jog Input Not Present
“1” 1 Jog Input Present
[Reference Owner]
This parameter displays which adapter currently has
the exclusive control of the selection of the
command frequency source.
Parameter Number 106
Parameter Type Read Only
Units Display Drive
“0” 0
Non-Owner
“1” 1 Current Owner
[Accel Owner]
This parameter displays which adapter has
exclusive control of selecting [Accel Time 1] or
[Accel Time 2].
Parameter Number 107
Parameter Type Read Only
Units Display Drive
“0” 0
Non-Owner
“1” 1 Current Owner
[Decel Owner]
This parameter displays which adapter has
exclusive control of selecting [Decel Time 1] or
[Decel Time 2].
Parameter Number 108
Parameter Type Read Only
Units Display Drive
“0” 0
Non-Owner
“1” 1 Current Owner
[Fault Owner]
This parameter displays which adapter is presently
resetting a fault.
Parameter Number 109
Parameter Type Read Only
Units Display Drive
“0” 0
Non-Owner
“1” 1 Current Owner
[MOP Owner]
This parameter displays which adapters are
currently issuing increases or decreases in MOP
Command Frequency.
Parameter Number 110
Parameter Type Read Only
Units Display Drive
“0” 0
Non-Owner
“1” 1 Current Owner
[Local Owner]
This parameter displays which adapter has
requested exclusive control of all drive logic
functions. If an adapter is in local lockout, all other
functions (except stop) on all other adapters are
locked out and non-functional. Local control can only
be obtained when the drive is not running.
Parameter Number 179
Parameter Type Read Only
Units Display Drive
“0” 0
Non-Owner
“1” 1 Current Owner
Owners