Manual

2 1336 PLUS & 1336 IMPACT
AC Drive Main Control Board Replacement
8. Install the replacement Main Control Board. Re-assemble components in
reverse order. If a Control Interface Board (L option) is
not being used,
verify that the jumpers are correctly inserted (see the drive User Manual for
details).
Important: If your drive is a 1336 IMPACT (Frames B-H), attach the
supplied label to the chassis in the area shown below.
Important: When replacing connectors, it is essential that correct
alignment is verified. Particular attention should be paid to
ribbon cable connectors. Misalignment of connectors could
result in damage to the drive.
!
ATTENTION: Replace any guards previously removed before
applying power to the drive. Failure to replace guards may result
in death or serious injury.
LANGUAGE MODULE
ALLEN-BRADLEY
LANGUAGE MODULE
ALLEN-BRADLEY
JOG
ESC
SEL
JOG
ESC
SEL
Frames A1 - A4
All Other Frames
Control Interface
(L Option) Board
Control Interface
(L Option) Board
Language Module
Jumpers
Language Module
DANGER
!!
Risk of electric shock and death.
Disconnect power, wait 5 minutes and
verify DC bus voltage before servicing.
Follow instructions in manual before use.
Earth ground required.
1336 IMPACT Drives
Attach label to chassis
above Main Control Board
1
336 IMPACT is a trademark of of Rockwell Automation, Inc.
Publication 1336 PLUS-5.67 – January, 2005 P/N 74103-909 (03)
Supersedes May, 1997 Copyright © 2005 Rockwell Automation, Inc. All rights reserved. Printed in USA.