Instruction Manual

2–22 Regenerative DC Bus Supply Operation
Adapter Definitions
Figure 2.14 — Adapter Definitions
1203-SG2
1203-SG4
2345
23
top
p
e
d
S
.00 H
z
0
+
Programming Only
HIM
(Adapter 1)
Expansion Options
(Adapter 2)
Digital I/O
— J15/J16 —
(Adapter 0)
1336 REGEN
Converter Control Board
J3
1
9
1
9
PORT 2
PORT 1
J6
J16
J15
E
S
C
S
E
L
top
p
e
d
S
.00 H
z
0
+
Adapter 2
Total Cable Distance Between Each
Device and Converter Must Be
10 Meters (33 ft.) or Less
ESC SEL
F1 F2 F3 F4
Port Expansion Option
(1203-SG2)
GPT or Other Remote Device
Cable Length
in Meters = 10 - X
Cable Length
in Meters = 10 - X
HIM or Other
Remote Device
Length = X Meters
Max Cable
Length = 10 Meters
Serial communication devices such as
the HIM that are connected to the 1336
REGEN Converter are identified by
SCANport serial communications as
adapters. Depending on the
communications options ordered, a
number of different adapters are
available.
When the Converter mounted
Programming Only HIM is supplied, it is
connected as adapter 1 as detailed in
Figure 2.14. Figure 2.14 also shows the
maximum distance allowed between
devices.