User Manual - Firmware 1.xxx-6.xxx Instruction Manual
2–8 Installation/Wiring
Table 2.A (continued)
575 Volt Input Protection Devices
1
Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping.
2
Maximum protection device size is the highest rated device that supplies drive protection.
3
Circuit Breaker - inverse time breaker.
4
Motor Circuit Protector - instantaneous trip circuit breaker.
5
Bulletin 140M with adjustable current range should have the current trip set to the minimum range that the device will not trip.
6
Manual Self-Protected (Type E) Combination Motor Controller, UL listed for 208 Wye or Delta, 240 Wye or Delta, 480Y/277 or 600Y/ 347. Not UL listed for use on 480V
or 600V Delta/Delta systems.
7
The AIC ratings of the Bulletin 140M Motor Protector may vary. See publication 140M-SG001B-EN-P.
8
Maximum rating allowed by US NEC. Exact size must be chosen for each installtion.
9
The Maximum Short Circuit Rating of a Cutler-Hammer Series HMCP is 100,000A at 240 volts, 65,000A at 480 volts and 25,000A at 575 volts.
Table 2.B
deleted
Frame
Drive
Catalog
Number
1336F-
CT Ratings
Dual Element
Time Delay Fuse
Non-Time
Delay Fuse
Circuit
Breaker
3
Motor
Circuit
Protector
4,9
140M Motor Starter with Adjustable Current Range
5, 6
HP
Input Output
Amps Amps Min.
1
Max.
2
Min.
1
Max.
2
Max.
8
Max.
8
Available Catalog Numbers
7
A4 F10 1 2.4 2.0 3 3 3 6 15 3 140M-C2E-B25 – – –
F20 2 4.8 4.0 6 6 6 10 15 7 140M-C2E-C63 140M-D8E-C63 – –
F30 3 7.2 6.0 10 12 10 15 15 7 140M-C2E-C10 140M-D8E-C10 140M-F8E-C10 –
F50 5 9.6 8.0 15 20 15 20 20 15 140M-C2E-C10 140M-D8E-C10 140M-F8E-C10 –
F75 7.5 10.0 10.0 15 20 15 30 35 15 140M-C2E-C10 140M-D8E-C10 140M-F8E-C10 –
F100 10 12.0 12.0 20 25 20 40 40 15 140M-C2E-C16 140M-D8E-C16 140M-F8E-C16 –
F150 15 19.0 19.0 25 35 25 60 60 30 140M-C2E-C20 140M-D8E-C20 140M-F8E-C20 140-CMN-2500
F200 20 25.0 24.0 30 45 30 80 80 30 140M-C2E-C25 140M-D8E-C25 140M-F8E-C25 140-CMN-2500
C 025 25 31.0 30.0 40 60 40 100 100 50 – – 140M-F8E-C32 140-CMN-4000
030 30 36.0 35.0 50 70 50 125 125 50 – – 140M-F8E-C45 140-CMN-4000
040 40 44.0 45.0 60 90 60 150 150 70 – – 140M-F8E-C45 140-CMN-6300
050 50 55.0 57.0 80 110 80 200 200 70 – – – 140M-CMN-6300
060 60 60.0 62.0 90 125 90 225 225 100 – – – 140M-CMN-6300
D 075 75 84.0 85.0 110 150 110 300 300 100 – – – 140M-CMN-9000
100 100 108.0 109.0 150 200 150 350 350 150 ––––
125 125 137.0 138.0 175 250 175 500 350 250 ––––
E 150 150 167.0 168.0 225 300 225 500 400 250 ––––
200 200 251.0 252.0 350 400 350 600 500 250 ––––
250 250 282.0 284.0 400 500 400 700 700 400 ––––
X300 300 295.0 298.0 400 600 400 800 800 400 ––––
F P350 350 347.0 350.0 450
Semiconductor fuse supplied with drive.
Refer to the 1336 Spare Parts list (publication 1336-6.5) for replacement information.
P400 400 397.0 400.0 500
G 300 300 297.0 300.0 400
Bussmann Type FWP, SPP, or 170M Series
Ferraz Shawmut Type A-70Q, A-70QS or A070URD Series
350 350 347.0 350.0 450
400 400 397.0 400.0 500
450 450 446.0 450.0 600/630
500 500 496.0 500.0 800
600 600 595.0 600.0 800