User Manual - Firmware 1.xxx-6.xxx Instruction Manual

2–6 Installation/Wiring
Table 2.A
240 Volt Input Protection Devices
1
Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping.
2
Maximum protection device size is the highest rated device that supplies drive protection.
3
Circuit Breaker - inverse time breaker.
4
Motor Circuit Protector - instantaneous trip circuit breaker.
5
Bulletin 140M with adjustable current range should have the current trip set to the minimum range that the device will not trip.
6
Manual Self-Protected (Type E) Combination Motor Controller, UL listed for 208 Wye or Delta, 240 Wye or Delta, 480Y/277 or 600Y/ 347. Not UL listed for use on 480V
or 600V Delta/Delta systems.
7
The AIC ratings of the Bulletin 140M Motor Protector may vary. See publication 140M-SG001B-EN-P.
8
Maximum rating allowed by US NEC. Exact size must be chosen for each installtion.
9
The Maximum Short Circuit Rating of a Cutler-Hammer Series HMCP is 100,000A at 240 volts, 65,000A at 480 volts and 25,000A at 575 volts.
Frame
Drive
Catalog
Number
1336F- HP
Input
Rating
Output
Rating
Dual-Element
Time Delay
Fuse
Non-Time
Delay Fuse
Circuit
Breaker
3
Motor
Circuit
Protector
4,9
140M Motor Starter with Adjustable Current Range
5, 6
Amps Amps Min.
1
Max.
2
Min.
1
Max.
2
Max.
8
Max.
8
Available Catalog Numbers
7
A1 F05 0.5 2.8 2.3 4 5 4 6 15 3 140M-C2E-B40 140M-D8E-B40 – –
F07 0.75 3.5 3.0 4 6 4 9 15 7 140M-C2E-B40 140M-D8E-B40 – –
F10 1 5.4 4.5 6 9 6 12 15 7 140M-C2E-B63 140M-D8E-B63 – –
A2 F15 1.5 7.3 6.0 8 12.5 8 15 20 15 140M-C2E-C10 140M-D8E-C10 140M-F8E-C10 –
F20 2 9.7 8.0 10 15 10 20 25 15 140M-C2E-C10 140M-D8E-C10 140M-F8E-C10 –
A3 F30 3 14.3 12.0 15 20 15 25 35 15 140M-C2E-C16 140M-D8E-C16 140M-F8E-C16 –
F50 5 21.3 18.0 25 30 25 45 60 30 140M-C2E-C25 140M-D8E-C25 140M-F8E-C25 140M-CMN-2500
F75 7.5 22.6 22.0 30 45 30 60 80 50 140M-C2E-C25 140M-D8E-C25 140M-F8E-C25 140M-CMN-2500
B 007 7.5 28.0 27.0 40 45 40 60 80 50 – – 140M-F8E-C32 140M-CMN-4000
010 10 35.0 34.0 50 60 50 80 100 50 – – – 140M-CMN-4000
015 15 49.0 48.0 70 90 70 110 150 70 – – – 140M-CMN-6300
C 020 20 63.0 65.0 100 110 100 125 200 100 – – – 140M-CMN-9000
025 25 75.0 77.0 100 150 100 200 250 100 – – – 140M-CMN-9000
030 30 79.0 80.0 125 175 125 225 300 150 – – – 140M-CMN-9000
D 040 40 119.0 120.0 120 225 120 300 300 150 – – – –
050 50 149.0 150.0 200 250 200 350 350 250 – – – –
060 60 178.0 180.0 250 300 250 450 450 250 – – – –
E 075 75 238.0 240.0 300 400 300 500 500 250 – – – –
100 100 289.0 291.0 400 500 400 700 700 400 – – – –
125 125 322.0 325.0 450 700 450 800 800 600 – – – –