Quick Start Guide User guide

8Publication 1336 IMPACT-5.5EN – May, 1999
1336 IMPACT Quick Start Guide
Fault Config cont. SCANport Config
Fault Select 2 22 Bit Selection SP2 Wire Enable 181 Bit Selection
Warning Select 2 23 Bit Selection SP Enable Mask 124 Bit Selection
Fault Limits Dir/Ref Mask 125 Bit Selection
Absolute Overspd 24 0.0 rpm/BMS rpm Start/Jog Mask 126 Bit Selection
Motor Stall Time 25 0.1/3276.7 sec Clr Flt/Res Mask 127 Bit Selection
Motor Overload % 26 110.0/400.0%
SCANport Status
Line Undervolts 27 10.0/90.0% Dir/Ref Owner 128 Bit selection
Testpoints Start/Stop Owner 129 Bit selection
Test Data 1 92 -32768/+32768 Jog1/Jog2 130 Bit selection
Test Select 1 93 0/65535 Ramp/CIFlt Owner 131 Bit selection
Test Data 2 94 -32768/+32767 Flux/Trim Owner 132 Bit selection
Test Select 2 95 0/65535
SCANport Analog
Interface/Comm SP An In1 Select 133 1/16
Digital Config SP An In1 Value 134 -32767/+32767
Relay Config 114 0/38 SP An In1 Scale 135 -1.000/+1.000
Relay Config 1 115 -800.0/+800.0% Sp An In2 Select 136 1/16
Relay Config 2 187 0/36 Sp An In2 Value 137 -32767/+32767
Relay Setpoint 2 188 800.0/+800.0 Sp An In2 Scale 138 -1.000/+1.000
Relay Config 3 189 0/36 Sp An Output 139 -32767/+32767
Relay Setpoint 3 190 -800.0/+800.0
Gateway Data In
Relay Config 4 191 0/36 Data In A1 140 -32767/+32767
Relay Setpoint 4 192 -800/+800.0% Data In A2 141 -32767/+32767
L Option Mode 116 1/25 Data In B1 142 -32767/+32767
L Option In Sts 117 Bit Selection Data In B2 143 -32767/+32767
Mop Increment 118 0.0/BMS Data In C1 144 -32767/+32767
Mop Value 119 0.0/BSMNA Data In C2 145 -32767/+3276
Pulse In PPR 120 500/2000 Data In D1 146 -32767/+32767
Pulse In Scale 121 0.01/10.00 Data In D2 147 -32767/+32767
Pulse In Offset 122 -BMS/+BMS
Gateway Data Out
Pulse In Value 123 0.0/+8xBMS Data Out A1 148 -32767/+32767
Analog Inputs Data Out A2 149 -32767/+32767
An In 1 Value 96 -32767/+32767 Data Out B1 150 -32767/+32767
An In 1 Offset 97 -19.980/+19.980 volts Data Out B2 151 -32767/+32767
An In 1 Scale 98 -16.000/+16.000 Data Out C1 152 -32767/+32767
An In 1 Filter BW 182 0.0/200.0 rad/sec Data Out C2 153 -32767/+32767
An In 2 Value 99 -32767/+32767 Data Out D1 154 -32767/+32767
An In 2 Offset 100 -19.980/+19.980 volts Data Out D2 155 -32767/+32767
An In 2 Scale 101 -16.000/+16.000
An In2 Filter BW 183 0.0/200.0 rad/sec
mA Input Value 102 -32767/+32767
mA In Offset 103 -32.000/+32.000 mA
mA In Scale 104 -16.00
mA In Filter BW 184 0.0/200.0 rad/sec
Analog Outputs
An Out 1 Value +0 105 -32767/+32767
An Out 1 Offset 106 -20.000/+20.000
An Out 1 Scale 107 -1.000/+1.000
An Out 2 Value 108 -32767/+32767
An Out 2 Offset 109 -19.980/+19.980 volts
An Out 2 Scale 110 -1.000/+1.000
mA Out Value 111 -32767/+32767
mA Out Offset 112 -32.000/+32.000 mA
mA Out Scale 113 -1.000/+1.000
Name No. Min./Max. Value Name No. Min./Max. Value