User Manual

Publication 1336-IN063A-EN-P - December 2002
Supplemental Instructions
D Frame Ferrite Core Installation Information (1336SFET B125, BX150, C125)
Six (6) ferrite cores need to be added to the drive with the installation of a Base Driver Board (Gate Driver Board)
Simply clip the ferrite cores around each set of twisted gate leads. Each set has three (3) wires, as shown below.
Six (6) ferrite cores are installed as shown.
The part number for the ferrite core is:
22530-753-01
1336-IN063A-EN-P.fm Page 1 Tuesday, December 17, 2002 5:04 PM