User Manual

Startup
Chapter 9
9-4
Initial Operation Step 9a
- Motor Disconnected (cont.)
The PR portion of the Programming and Display Panel will indicate the
speed source currently being used. Verify that the drive will accept the
required speed reference sources.
Freq
P R
Are preset speeds to be used?
No – Go to Step 9b.
Yes – Select preset Speed 1. Select preset Speed 5.
Display must be - 7. Display must be - 9.
Select preset Speed 2. Select preset Speed 6.
Display must be - 8. Display must be - 9.
Select preset Speed 3. Select preset Speed 7.
Display must be - 9. Display must be - 9.
Select preset Speed 4.
Display must be - 9.
Open all preset speed inputs.