User Manual

Operation and Programming
Chapter 5
5-20
Max Speed Settings Important: The maximum allowable drive output frequency will be
determined by the lowest programmed value of any of the following
parameters:
• Parameter 3 Frequency Range
• Parameter 15 Maximum Frequency
• Parameter 51 Upper Frequency Clamp
• Parameter 53 Bias Frequency –– If Parameter 53 is Higher Than
Parameter 54
• Parameter 54 Gain Frequency –– If Parameter 54 is Higher Than
Parameter 53
Max Speed Settings
100% of Output Frequency
0%
0%
Parameter 16
100% of Output Voltage
noitareleccA
Parameter 15
0%
0%
100% of Output Frequency

Parameter 15 = Parameter 16
100% of Output Voltage
noitareleccA