User Manual

Installation and Wiring
Chapter 4
4-9
71/220HP (5.515kW) Input and output power connections are marked on the drive Power
Terminal Block Power Wiring Terminal Block. The Power Terminal Block is an eight position terminal
block located at the bottom of the drive. For maintenance and setup
procedures, the drive may be operated without a motor connected.
Drive Power T erminal Block
Drive Ground Terminals
Drive Output Terminals
W
/
T3
V
/
T2
U
/
T1
Figure 42 -- 71/220HP (5.515kW) T erminal Block Power Wiring