User Manual Owner's manual

AC Induction Motors 13
Typical Cutaway View of a Dripproof, Horizontal Integral Horsepower Motor
364 - 445 Frame Size
P.E. = Pulley End O.P.E. = Opposite Pulley End
1
Bracket and frame screens are optional.
2
Bearing Numbers are shown on motor nameplate when requesting information or parts always give complete motor description, model and serial numbers.
Item Description Item Description Item Description
1. Frame Vent Screen
1
11. Bracket O.P.E. 21. Bracket Holding Bolt
2. Conduit Box Bottom 12. Baffle Plate O.P.E. 22. Inner Bearing Cap P.E.
3. Conduit Box Top-Holding Screw 13. Rotor Core 23. Inner Bearing Cap Bolt
4. Conduit Box Top 14. Lifting Eye Bolt 24. Grease Plug
5. Conduit Box Bottom-Holding Bolt 15. Stator Core 25. Ball Bearing P.E.
2
6. Ball Bearing O.P.E.
2
16. Frame 26. Shaft Extension Key
7. Pre-loading Spring 17. Stator Winding 27. Shaft
8. Inner Bearing Cap O.P.E. 18. Baffle Plate Holding Screw 28. Drain Plug (grease)
9. Grease Plug 19. Baffle Plate P.E. 29. Bracket Screen
1
10. Inner Bearing Cap Bolt 20. Bracket P.E.