User Manual

2-4
Step 2 - Plan the Installation
1329I-5.0 Integrated Drive/Motor — January, 1999
2.2 Handling and Lifting Guidelines
Follow these handling and lifting guidelines:
• In the case of assemblies on a common base, carefully lift the assembly by a sling
around the base or by other lifting means on the base.
• When designing the lifting means, take care to assure lifting in the intended
direction.
• Do not lift the unit by the plastic blower cover.
• Do not use any lifting means under the Drive Section.
• Do not lift attached equipment by lifting the motor.
• Do not use the 1329I unit as a step.