Manual

C-18 DeviceNet Objects
Class Code 0x29 – Control
Supervisor Object
(Continued)
Instance 1 Attributes (Continued)
Common Services
State Transition Diagram
The following State Transition Diagram provides a graphical description of
the states and state transitions that are reflected in attribute #6.
Figure 3.1 State Transition Diagram
Attribute ID Access Rule Name Data Type Value
14 Get Warn Code UINT 0
15 Get Ctrl From Net BOOL 0 = TB or keypad control
1 = Network control
16 Get/Set DNet Fault
Mode
USINT 0 = Fault and Stop
1 = Ignore
17 Get/Set Force Fault/
Tr i p
BOOL 0 -> 1 = Force fault
102
(1)
Get/Set DNet Preset
Command
USINT 0 to 7
103
(1)
Get/Set DNet Speed
Ref RPM
UINT 0 to 3600 (RPM)
104
(1)
Get/Set DNet Speed
Ref Hz
UINT 0 to 120.0 (0.1 Hz)
(1)
This attribute can be set only when the expected packet rate (EPR) for the explicit connection is non-zero and
the 1329I does not have an active I/O connection.
Service Code
Implemented for
Service NameClass Instance
0x05 No Yes Reset
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Switch Power On
Ready
Enabled
Faulted
Switch Power Off
Fault Reset
Fault Detected
Fault Detected
Stop Complete
Run
Non-Existent
Stopping
Fault Detected
No Run
Run