User Manual Owner's manual

DC Motors 23
Brush Rigging and Brush Holders
The brush holders in all motors are often constant pressure design and do
not require nor are capable of adjustment over the life of the brushes.
DC180ATZ & DC210ATZ
Conduit box is attached to the commutator end top hand hole cover and
cannot be located on the side.
C180ATZ
Conduit box is located on the commutator end bracket.
Parts Identification C180AT, DC180ATZ & DC210ATZ
Number Description Number Description
1 Grease Plug (C180 only) FE 12 Inner Coil
2 Grease Plug (C180 only) BE 13 Armature Core
3 Ball Bearing FE 14 Frame
4 Ball Bearing BE 15 Armature Coil
5 Rocker 16 Inner Fan
6 Bracket FE 17 Key
7 Bracket BE 18 Shaft
8 Brush 19 Conduit Box
9 Brush Holder 20 Bearing Cap BE
10 Commutator 21 Bearing Cap (C180 only)
(Cap not shown)
FE
11 Field Coil