Instruction Manual

1204 Reflected Wave Reduction Device with Common Mode Choke 7
Wiring
4. Wire the device as indicated below. The maximum and minimum wire
size accepted by the RWC terminal block is 4.0 and 0.75 mm
2
(10 and
18 AWG). Use copper wire only with a minimum temperature rating of
75 degrees C. Maximum torque is 1.81 N-m (16 lb.-in.).
Motor Phase U
RWC Terminal Bloc
k
A
C
Driv
e
Motor Phase V
Motor Phase W
Motor Ground
from Drive Terminal W
from Drive Terminal V
from Drive Terminal U
from Drive Ground
U
V
W
PE
PE
U1
V1
W1
3.1 m (10 ft.) - Maximum Length
() g