User manual

3-6 Configuring the Serial Converter
8. Select the settings shown in
Figure 3.4.
Important: If you have previously set Parameter 03 - [DF1 Rate
Cfg] to 19.2K or 38.4K, select that value in the Bits per
second box.
Figure 3.4 Properties Dialog Box
9. Click OK. A blank HyperTerminal workspace appears.
10. Select File > Properties to display the Properties dialog box.
11. Click the Settings tab. See
Figure 3.5.
12. Under Function, arrow, and ctrl keys act as, select Terminal keys.
13. In the Emulation box, select VT100.