User manual

Getting Started 1-3
Equipment Shipped with the Serial Converter
When you unpack the serial converter, verify that the package includes:
User-Supplied Equipment
To configure the serial converter, you must use one of the following:
Required Equipment
❑ One Smart Self-powered Serial converter
❑ One 1203-SFC serial cable
❑ One 1202-C10 cable
❑ One DriveExplorer Lite CD
❑ This manual
❑ DriveExplorer software
DPI products require DriveExplorer version 2.01 or greater.
SCANport products work with all versions of DriveExplorer.
❑ DriveTools 2000 software (version 1.xx or greater).
❑ PowerFlex HIM (only if using a PowerFlex drive or other DPI
product).
❑ Terminal emulation software such as HyperTerminal.
❑ VT-100 compatible terminal.