User Manual

SCANport MessagingB–22
Publication 1203–5.9 –– October 1996
Read Product Software Version
The Read Product Software Version message lets you request the
product software version from a SCANport device. The following is
an example of this request:
Service=Get Attribute Single
Internal A–B Vendor Specific Class
Instance
Attribute
Data Length=0 Bytes
M0:e.000
M0:e.001
M0:e.002
M0:e.003
M0:e.004
000e
0092
0001
0001
0000
Value
Read Product Software Version
Service=Get Attribute Single
Internal A–B Vendor Specific Class
Instance
Attribute
Data Length=6 Bytes
M1:e.100
M1:e.101
M1:e.102
M1:e.103
M1:e.104
000e
0092
0001
0001
0006
Value
Response
Product Software Version (00ca=202=FRN2.02)
Discard
Discard
M1:e.105
M1:e.106
M1:e.107
00ca
0000
0000
Figure B.16 shows a Read Product Software Version request. The
software version for microprocessor 1 is FRN2.02. The instance
number, set into N10:2, determines the microprocessor being
accessed by this message. Some products have multiple
microprocessors, and all products have at least one.
Figure B.16
Example of Read Product Software Version
address 0 1 2 3 4 5 6 7 8 9
N10:0 000e 0092 0001 0001 0000
address 0 1 2 3 4 5 6 7 8 9
N11:0 000e 0092 0001 0001 0006 00ca 0000 0000