User Manual

SCANport MessagingB–14
Publication 1203–5.9 –– October 1996
The four formulas are shown here. The first two formulas are used
when descriptor bit 6 is set to 1.
Engineering Value =
(Internal Value + Offset) x Multiplier x Base
Divisor x 10
Decimal Precision
Internal Value =
Engineering Value x Divisor x 10
Decimal Precision
Multiplier x Base
– Offset
Engineering Value =
(Internal Value + Offset) x Multiplier x Base
Divisor
Internal Value =
Engineering Value x Divisor
Multiplier x Base
– Offset