User Manual

4–22 Using Enhanced Mode

Publication 1203–5.9 –– October 1996

The following data table shows the input data read from the SLC to

SCANport module via the SLC backplane.

address 15 data 0

I:1 0000 0000 0000 0000 SCANport Channels 1 & 2 Channel Status

I:1.1 0000 0000 0000 0000 SCANport Channel 3 Channel Status

I:1.2 0000 0000 0000 0000 SCANport Channel 1 Logic Status

I:1.3 0000 0000 0000 0000 SCANport Channel 1 Feedback

I:1.4 0000 0000 0000 0000 SCANport Channel 2 Logic Status

I:1.5 0000 0000 0000 0000 SCANport Channel 2 Feedback

I:1.6 0000 0000 0000 0000 SCANport Channel 3 Logic Status

I:1.7 0000 0000 0000 0000 SCANport Channel 3 Feedback

I:1.8 0000 0000 0000 0000 SCANport Channel 1 Datalink A1 Out

I:1.9 0000 0000 0000 0000 SCANport Channel 1 Datalink A2 Out

I:1.10 0000 0000 0000 0000 SCANport Channel 1 Datalink B1 Out

I:1.11 0000 0000 0000 0000 SCANport Channel 1 Datalink B2 Out

I:1.12 0000 0000 0000 0000 SCANport Channel 1 Datalink C1 Out

I:1.13 0000 0000 0000 0000 SCANport Channel 1 Datalink C2 Out

I:1.14 0000 0000 0000 0000 SCANport Channel 1 Datalink D1 Out

I:1.15 0000 0000 0000 0000 SCANport Channel 1 Datalink D2 Out

I:1.16 0000 0000 0000 0000 SCANport Channel 2 Datalink A1 Out

I:1.17 0000 0000 0000 0000 SCANport Channel 2 Datalink A2 Out

I:1.18 0000 0000 0000 0000 SCANport Channel 2 Datalink B1 Out

I:1.19 0000 0000 0000 0000 SCANport Channel 2 Datalink B2 Out

I:1.20 0000 0000 0000 0000 SCANport Channel 2 Datalink C1 Out

I:1.21 0000 0000 0000 0000 SCANport Channel 2 Datalink C2 Out

I:1.22 0000 0000 0000 0000 SCANport Channel 2 Datalink D1 Out

I:1.23 0000 0000 0000 0000 SCANport Channel 2 Datalink D2 Out

I:1.24 0000 0000 0000 0000 SCANport Channel 3 Datalink A1 Out

I:1.25 0000 0000 0000 0000 SCANport Channel 3 Datalink A2 Out

I:1.26 0000 0000 0000 0000 SCANport Channel 3 Datalink B1 Out

I:1.27 0000 0000 0000 0000 SCANport Channel 3 Datalink B2 Out

I:1.28 0000 0000 0000 0000 SCANport Channel 3 Datalink C1 Out

I:1.29 0000 0000 0000 0000 SCANport Channel 3 Datalink C2 Out

I:1.30 0000 0000 0000 0000 SCANport Channel 3 Datalink D1 Out

I:1.31 0000 0000 0000 0000 SCANport Channel 3 Datalink D2 Out