User Manual

Chapter

Publication 1203–5.9 –– October 1996

Installing the SLC to SCANport

Module

Chapter 2 covers the following information:

• what you need to do before you install the SLC to SCANport

module

• how to install the SLC to SCANport module

• how to remove the SLC to SCANport module

Important: You cannot place an SLC rack unit containing an SLC

to SCANport module in an enclosure that is less than

200 mm (8 in) deep.

Before you install your SLC to SCANport module, you need to:

• Determine the length of your SCANport cable(s).

• Determine the placement of your SCANport cables.

• Locate the DIP switch on your SLC to SCANport module.

Chapter Objectives

Before You Install the

Module