User guide

4–5Configuring and Interfacing
1203–5.5 September 1995
The following is the data table structure for PLC–2 style addressing:
Parameter
Number
PLC–2 Style Address
Decimal (Octal)
Description of Location’s Purpose
1 – 7039
512 + Parm #
(1000 to 16577)
Parameter value read
(16600 to 167770 Status of last parameter write
1 – 7039
7680 + Parm #
(17000 to 34577)
Parameter read full
(34600 to 34677) Block transfer emulation area
(34700) Logic command/status
(34701) Reference/feedback
(34702) Datalink A1
(34703) Datalink A2
(34704) Datalink B1
(34705) Datalink B2
(34706) Datalink C1
(34707) Datalink C2
(34710) Datalink D1
(34711) Datalink D2
(34712) #ENQs
(34713) #NAKs
(34714) Message TIMEOUT (mS)
(34715) Application TIMEOUT (seconds)
(34716) Adapter series number (2=B)
(34717) Adapter firmware version (201=FRN2.01)
(34720) Maximum node address (DH–485)
(34721 to 37677) Reserved area for future expansion
(37700 to 37777) System area
Note: The address locations shown in this table are not limited to
PLC–2 commands and may be used by any device that can generate
them.
"