Owner manual

FLEX I/O SCANportt Base Installation Instructions
1–2
1203-5.7ML- April 1996
Component Identification
1 Module locking latch
2 Keyswitch - Set to the position required for the installed module
3 Male flexbus connector (beneath the cover plug)
4 Cover plug for male flexbus connector
5 Key slot for attaching to 1203 module
6 Channel 2 SCANport connector
7 Locking tab for DIN rail
8 Channel 1 SCANport connector
9 Mounting holes for panel mounting
10 Female flexbus connector