Manual

Chapter 4
EE/BRAM Functions
4–3
To reset the parameter values to initial factory default values, choose option
four (4) in the EE/BRAM menu with the
or key.
Press the
key to select this option. The display will respond
with the question in Figure 4.5.
Figure 4.5
Initial Parameters to RAM V erification
Factory Defaults to RAM
Are you sure (Y/N) ?
Press the
F1
soft designator for Yes or press the
F4
soft designator (NO) to escape this function and return to the EE/BRAM
menu. If you choose Escape, another verifcation screen will prompt you on
saving parameters.
Saving Factory Defaults to RAM