Manual

Chapter 2

Parameter Option

2–3

With the Linear Parameter Screen (Figure 2.5) displayed, perform the

following steps:

Step 1 Use the

or key to scroll through the

parameter numbers; or

Step 2 If you wish to enter a parameter number directly, press the

soft designator key. The dialog box shown in Figure

2.5 will appear.

Figure 2.5

Linear

Direct Access Screen

Linear:

[ ]

Auto

une Speed

Auto T

une I Limit

Not Used

Par

Enter Parameter : < >

Min : 1 Max 497

Step 3 Use the numerical keys

PRESET 2

to enter a

parameter number within the cursors (Figure 2.6).

Figure 2.6

Parameter

Number Entry

Enter Parameter : <90>

Min : 0 Max 497

Press to enter your selected Linear Parameter number. The

information on your selected parameter (90 in this case) will appear as shown

in Figure 2.7.

If you press without entering a parameter number (no digits), the

display will return to the previous parameter. Toggling between 2 parameters

is allowed (Present & Previous).

Accessing a Parameter

in the Linear Mode