Manual

Chapter 2
Parameter Option
2–2
To access the Linear Parameter Mode from the Main Menu (Figure 2.3),
press the Increment
or Decrement key to move the
cursor to selection #1 “Parameter”.
Figure 2.3
Main
Menu
Password ProcDspy
Main Menu:
< 1 - Parameter >
2- Link Summary
3- Fault Queue
4 - Warning
5 - EEPROM
Help
Press the Enter Key , the terminal will go into either
File/Group/Element or Linear Mode, depending on which mode was last
used. The initial default on startup is the FGE mode. If the FGE Mode
appears first, press the
F4
soft designator and the Linear
Parameter Mode will appear, showing the current parameter value, minimum
and maximum values and any links that are present (Fig. 2.4).
Figure 2.4
Linear
Parameter Mode
Param # Val_Base
Linear: [ 40 ]
FGE Mode
F1 F2 F4
Auto T une Speed
< Auto T une T Limit >
Not Used
Not Used
Par
F3
Value : 50.0
Min : 25.0
Max : 100.0
Link : None
Accessing the Linear
Parameter Mode