Owner`s manual

You can use the Line Input function when you wish to hook up an additional stereo signal
source without the use of a mixer console. CD players, DVD music players, MP3 players
etc can be plugged directly in to the RCA jacks labeled LINE INPUT.
To connect a CD, DVD music player or MP3 player.
1. Turning your Power Gig unit to OFF position.
2. Turn Master Volume to 0 position.
3. Turn Level control to 0 position.
4. Connect the music source unit to the RCA jacks marked Line In.
5. Use the push button (located above to RCA jacks) to select between Line input
or MP3 input.
6. Switch ON your Power Gig unit.
7. Slowly turn the Level Volume control clockwise until the CLIP LED indicator begins
to blink, then turn it down slightly. This indicates the maximum input voltage gain is
matched and set properly.
8. Turn Master Volume up to achieve proper volume.
Line Input Feature
OFF
1
POWER
2 3
6 75
8
4
ON
POWER
7
VOLUME
100
1
2
3
4 6
5
7
8
9
VOLUME
100
1
2
3
4 6
5
7
8
9
LEVEL
100
1
2
3
4 6
5
7
8
9
LEVEL
100
1
2
3
4 6
5
7
8
9
LINE IN
LINE OUT
L R
MP3
LINE
PWR
CLIP