Owner`s manual
1. Display screen.
2. USB and SD Card input.
3. MP3 Player controls. Previous / Next track buttons also serve as volume
controls. For track control quickly press button. For volume control press an
hold button. Press Play button once to play track, press again to pause. When
in FM radio mode press and hold to scan through.
4. Mode control switches between input modes: FM Radio, Bluetooth, USB,
and SD/MMC.
5. EQ control cycles through different preset equalization settings.
6. Master volume
7. Power LED indicator and amplier clip limit LED indicator.
8. 2 band equalization control panel.
• Bass adjust the low frequencies to +/-6dB.
• Treble adjust high frequencies to +/-6dB
9. This knob controls the Mic 1 / Mic 2 Level adjustment knob.
10. Mic input port accepts XLR type connectors and is designed to suit a wide
range of balanced and unbalanced signals. We recommend using profesional
balanced dynamic, condenser or ribbon mics as they are least likely to be
affected by interference. Low cost, high impedance mics can be used,
however the level of background noise is higher since an unbalanced circuit is
far more susceptible to interference.
11. Mic 1 / Mic 2 line input port accepts balanced and unbalanced 1/4˝ TRS
plugs. When you use an unbalanced 1/4˝ TRS plug, the line input automatically
turns the ring into ground.
12. Line / MP3 input selector button.
13. Pre-Amp RCA input / output jacks.
14. Output to passive speaker.
15. Voltage selector switch.
16. IEC AC power socket.
17. User serviceable fuse.
18. Power switch.