User guide

Descriptions continued.........

CALIBRATE button - this button is used to calibrate the tuner to match

the pitch of any instrument or audio source (like an old piano or tape

player). For details on this function - see section titled “Calibration.”

OUTPUT Jack - This jack provides output to your amp or the next pedal

in the signal chain. Use a 1/4” guitar cable to plug into the next effect or

into a guitar amplier. This jack provides a contant output whether the

tuner is on or off and does not mute the output.

OUTPUT JACK (MUTE)- This jack provides output to your amp or the

next pedal in the signal chain. Use a 1/4” guitar cable to plug into the

next effect or into a guitar amplier. This jack will MUTE the output to

the next pedal or amp when the tuner is turned on. This is ideal for silent

tuning on stage.