Owner manual

28
Preset Dump
MIDI PRESET DUMP PROCEDURE:
To DUMP or copy presets from your PatchMate LOOP 8 Floor to another PatchMate LOOP 8 Floor,
rst connect the two via MIDI OUT of the sending PatchMate LOOP 8 Floor to the MIDI IN of the
receiving PatchMate LOOP 8 Floor.
1. Turn the PatchMate LOOP 8 Floor “ON”, within the rst 3 seconds press and release the STORE but-
ton. The Store Button will begin “ashing”. Note: this procedure must be done within 3 seconds of the
PatchMate LOOP 8 Floor being turned “ON If you forgot just turn the Patchmate Loop 8 off
for 5 seconds and try again.
2. Press SWITCH 5 (PRESET DUMP ), the LED above it will be lit.
3 PRESS and RELEASE the STORE BUTTON to execute a dump of all user preset data via MIDI. The
STORE BUTTON will blink rapidly during this process.
After the PatchMate LOOP 8 Floor has nished the Midi Preset Dump process the PROGRAMMING
MODE will be canceled and the PatchMate LOOP 8 Floor will return to the current PRESET.