Owner manual
10
Individual LOOP Jacks Descriptions
1 IN Jack
This is the rst jack in the signal chain. The audio signal will enter the "LOOP" through this
jack.
2 SEND - N.C. Jack
This jack is used to send the signal to the desired audio device or to an ampliers footswitch jack
for N.C. (NORMALLY CLOSE) channel switching.
3 RETURN Jack
This jack is used to receive the returned signal from the desired audio device..
4 OUT - N.O. Jack
This jack is then used to send the signal to the next LOOP or next device in the signal chain or to
an ampliers footswitch jack for N.O. (NORMALLY OPEN) channel switching.