Specifications

Preset Select/Store Switch and Store LED - this switch allows you

scroll through the presets by using the footswitch. Press and depress the

Preset Select Footswitch to change the preset. Note that the presets will

change in order from 1 to 8. After preset 8, the preset will go back to

preset 1.

STORE function - Use this function to STORE (or save) changes you

have made to a preset. To operate the STORE function, press and hold

the PRESET SELECT switch down for 2 seconds. This will save the

changes to your preset. The STORE LED will “hold on” and then return

to flashing to confirm the storing process has been completed.

On/Off Footswitch and LED - this footswitch is used to turn “ON” or

“OFF” the Cyborg Reverb. When the LED is lit , the reverb is “ON”

Output Jack - Using a standard guitar cable with a 1/4” jack, plug into

your amplifier or the next effect pedal in your signal chain.

MIDI Jack - Using the Rocktron MIDI Breakout Cable (sold separately)

you can connect the Cyborg Pedal to a Rocktron MIDI Footcontroller

such as the Rocktron MIDI XChange, MIDI Mate or All Access. This

feature allows you to access all 64 presets and even connect other Cyborg

pedals to be controlled by the MIDI footcontroller.

Descriptions Continued