Manualshelf

User Guide

ManualsBrandsRockspace ManualsComputers & AccessoriesMesh WiFi System - up to 6000 sq. Ft and 90 Devices Whole Home Coverage, 1200Mbps WiFi Mesh Network, WiFi Router/Extender Replacement, Gigabit Ports, Easy Setup, Parental Control (3 Pack)
31323334353637383940
27
Port Forwarding
The Port Forwarding funcon enables users to access your LAN resources, such as resources on the web server or
FTP server, through the internet.
Procedure:
Step 1 Choose Sengs > Port Forwarding to enter the configuraon page.
Step 2 Tap Add rule.
Step 3 Select the device to which the rule applies.
Step 4 Tap Next.
Step 5 Set up a port forwarding rule.
Common Protocol/Port: oponal. The App presets some common protocols and their port numbers,
such as FTP, TELNET, and so on. You can select one as required, and the Internet Port Number and
External Port Number are automacally populated. If the port numbers you want to set are not
included, you can set them manually in the Internal Port Number and External Port Number boxes.
Internal Port Number: Enter the service port of the corresponding server on the LAN device.
External Port Number: Enter the port which is enabled for the internet users.
Protocol: Select the protocol of the service. If you are not sure about it, you can select TCP&UDP.
Step 6 Tap Save.